Amateur telescope making by Ingalis A.G. (ed.)

By Ingalis A.G. (ed.)

Show description

Read or Download Amateur telescope making PDF

Best instruments & measurement books

Materials Characterization: Introduction to Microscopic and Spectroscopic Methods

This e-book covers cutting-edge strategies everyday in glossy fabrics characterization. very important facets of characterization, fabrics constructions and chemical research, are incorporated. frequent options, equivalent to metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are defined.

The big dish: The fascinating story of radio telescopes

First-class FIRST variation HARDCOVER WITH airborne dirt and dust JACKET COLLECTIBLE.

Laser-based measurements for time and frequency domain applications : a handbook

Foreword by means of Nobel laureate Professor Theodor W. Hänsch of Ludwig-Maximilians-Universität München according to the authors’ experimental paintings during the last 25 years, Laser-Based Measurements for Time and Frequency area purposes: A instruction manual provides uncomplicated thoughts, cutting-edge purposes, and destiny traits in optical, atomic, and molecular physics.

Zodiac Calendars in the Dead Sea Scrolls and Their Reception: Ancient Astronomy and Astrology in Early Judaism

The traditional mathematical foundation of the Aramaic calendars within the useless Sea Scrolls is analysed during this research. Helen R. Jacobus re-examines an Aramaic zodiac calendar with a thunder divination textual content (4Q318) and the calendar from the Aramaic Astronomical publication (4Q208 - 4Q209), all from Qumran. Jacobus demonstrates that 4Q318 is an ancestor of the Jewish calendar this present day and that it is helping us to appreciate 4Q208 - 4Q209.

Extra resources for Amateur telescope making

Sample text

H. K. A. Wendman, G. Gurley, V. Elings, Short cantilevers for atomic force microscopy, Rev. Sci. Instrum. 67 (10) (1996) 3583–3590. [108] A. Torii, M. Sasaki, K. Hane, S. Okuma, A method for determining the spring constant of cantilevers for atomic force microscopy, Meas. Sci. Technol. 7 (1996) 179–184. T. S. Watson, S. Myra, Determination of the spring constants of probes for force microscopy/spectroscopy, Nanotechnology 7 (1996) 259–262. M. Notley, S. J. Craig, Calibration of colloid probe cantilevers using the dynamic viscous response of a confined liquid, Rev.

89 (8) (1988) 5190–5192. M. M. McClellamd, R. Erlandsson, S. Chiang, Atomic-scale friction of a tungsten tip on a graphite surface, Phys. Rev. Lett. 59 (17) (1987) 1942–1946. [31] Y. Miyahara, T. Fujii, S. Watanabe, A. Tonoli, S. Carabelli, H. Yamada, H. Bleuler, Lead zirconate titanate cantilever for non-contact atomic force microscopy, Appl. Surf. Sci. 140 (1999) 428–431. H. Sorenson, U. W. A. Morch, Preparation of platinum/ iridium scanning probe microscopy tips, Rev. Sci. Instrum. 70 (7) (1999) 3059–3067.

Appl. Phys. 83 (9) (1998) 4672–4677. E. Peterson, Silicon as a mechanical material, Proc. IEEE 70 (5) (1982) 420–457. [23] A. Khan, J. Philip, P. Hess, Young’s modulus of silicon nitride used in scanning force microscope cantilevers, J. Appl. Phys. 95 (4) (2004) 1667–1672. J. A. Evans, Young’s modulus, shear modulus, and Poisson’s ratio in silicon and germanium, J. Appl. Phys. 36 (1) (1965) 153–156. [25] T. Hantschel, S. Slesazeck, P. Niedermann, P. Eyben, W. Vandervorst, Integrating diamond pyramids into metal cantilevers and using them as electrical AFM probes, Microelectron.

Download PDF sample

Rated 4.15 of 5 – based on 29 votes